Small Electricity plug
Narrow electricity plug
less than a minute
Creating a narrow as possible electricity plug (to integrate behind a mirror).
Goal
I wanted to integrate an electricity plug behind my mirror, which only has a few centimeters of aluminum between the glass and the wall. Only two pins are needed, no ground. I didn’t immediately find a solution that was - easily - commercially available.
Realization
Used components:
- EU to US travel adapter, which will be dismantled and replaced by the 3d-printed part.
- 3d printed parts, openscad file:
- a new housing for the EU to US adapter, internals are just transferred without modification
- a counter piece for the above cover (the two pieces slide in each other)
- an (option) drilling guide to have the four drilled holes (two for screws, two for the electricity pins) somewhat decently aligned
- US to EU travel adapter
- female flat electricity socket to connect the 230V
Putting it together
- Move the internals from the EU to US travel adapter to the 3d printed part.
- Drill two M4 holes for mounting, drilling two M6 holes for the guidance of the electricity pins
Could you get rid of the second US-EU conversion, probably yes … . But feel free to mod.
Last modified August 15, 2022: typo description (8d60de7)